Project Number 2: Slightly More
Complicated Lines
Draw
the lines of a vessel 20 meters long, six meters in beam, with
a draft amidships of 2.2 meters. The
vessel should have a transom and a rabbeted keel,
stem, and sternpost. There should be a
deck, and the location of its outboard edge should be indicated
by a dashed line on all three views.
Draw this vessel at scale 1:50, and provide a
graphic scale of the proper form. The
drawing will be graded on the basis of accuracy (agreement of
points between views; each point out of agreement by more than
0.5 mm is 1.6 points off), completeness, fairness, and neatness. This drawing should be properly titled,
dated, and signed.
The project is due at the beginning of
class in Week 5.